Leaking Tap Repair in Mortlake, Handled Fast
300+ five-star reviews
A dripping tap gets fixed properly here, not just tightened until it drips again next month. Our leaking tap repair team covers every Mortlake home, backed by a $0 Call Out Fee.
Call (02) 9140 0159 now.
- Lic #292427C NSW plumbing licence — fully insured, water and gas
- 300+ Five-Star Reviews 300+ five-star reviews back the team you'll get for a leaking tap repair callout.
- 15+ Years' Experience 15+ years' experience means fast, accurate diagnosis on almost any tap fault.
- $0 Call Out Fee It costs nothing to have us come and look at a persistent drip.
Signs It's Urgent, Signs It Can Wait
A dripping tap is rarely a true emergency, but a handful of situations are worth calling about sooner rather than later.
Water still running after the tap's fully closed. If turning the handle hard makes no difference, the seal inside has given way completely rather than just thinned out.
A cupboard base that's gone soft or discoloured. An unnoticed drip under a sink can sit against chipboard for weeks before anyone spots the damage.
A water bill that's crept up with no obvious reason. Even a thin, steady trickle running around the clock adds up faster than most people expect.
What You Get With Leaking Tap Repair
Leaking tap repair covers more than swapping a washer. We work out why the tap failed in the first place so the fix actually lasts, whatever's fitted in your kitchen, bathroom or laundry.
Internal valve and seal replacement. The inner workings get swapped for parts matched to your tap's actual make, not a generic universal kit.
Mixer servicing. A single-lever mixer fails in its own particular way, different again from an older two-tap setup, and we carry stock for both.
Garden and outdoor tap repair. Exposed fittings wear and corrode on a different timeline to anything indoors.
Spout, aerator and handle fixes. Some drips trace back to a worn seat or a loose fitting rather than the valve itself.
Fair, Upfront Pricing on Leaking Tap Repair
A leaking tap repair is usually one of the smaller jobs we quote, but the price still depends on what's actually failed inside the tap.
- Tap type: a basic single-handle tap is quicker to service than a mixer with a cartridge that has to be sourced correctly.
- Access: a tap tucked into a tight vanity cupboard or an awkward outdoor position takes longer than one out in the open.
- Tap era: an older cottage's original brass tapware sometimes needs a part sourced specially, which can add a little time compared with a newer mixer using current stock parts.
- Number of taps: fixing two or three dripping taps in one visit costs less overall than separate call-outs for each.
- Water damage check: if a drip has run a while, we check for softened cabinetry while we're there.
Whatever's fitted, you'll get fair, upfront pricing before we touch a thing, and $0 Call Out Fee just to have us take a look.
What Mortlake's Housing Means for Leaking Tap Repair
Mortlake's housing runs from pre-1940 double-brick cottages through to rendered townhouses and apartments built since the 1990s, and that construction mix shows up directly in the tapware we're called to fix.
Older cottages, some near Adams Street, still carry original brass tapware and compression valves that wear differently to the ceramic-disc mixers fitted in the newer render and brick-veneer builds.
A worn compression washer in an older cottage is a straightforward fix. A failed ceramic cartridge in a newer mixer usually needs a specific replacement part matched to the brand, which is why knowing a home's era before we arrive helps us bring the right parts the first time.
What the Law Asks of Leaking Tap Repair
Tap repairs sit squarely inside licensed plumbing work in NSW, even though a washer swap looks simple enough to try yourself. Any work connected to the water supply, including re-seating a tap or replacing a valve, has to be carried out or supervised by a licensed plumber.
We work to AS/NZS 3500 plumbing standards on every job, and the labour on each repair is backed by the Lifetime Labour Warranty, so a repeat drip from the same fix doesn't cost you again.
Our Callout Process for Leaking Tap Repair
Heavy rain has a way of finding every weak point in your plumbing at once. Tell us what's happening and where when you call.
We arrive expecting the worst and hope for less, checking beyond the obvious symptom while the ground's still wet.
We'll tell you exactly what's wrong and the best way to fix it, then fair, upfront pricing agreed before work starts.
Fixed and checked against a repeat, not just patched for tonight. Quality Workmanship Guaranteed on the finished job.
A straightforward washer or cartridge swap is usually done inside one visit, though a tap that's seized solid or missing an obsolete part can take a little longer to source and finish properly.
Why Choose Us for Leaking Tap Repair
A dripping tap might feel like a small job to call about, but we treat it with the same care as anything larger.
You'll get a fair price, settled before any work begins, whether it's one tap or three, with no reason to shop around once you've had a quote from us.
And if the same tap starts dripping again from our own repair, we return and put it right under warranty, at no extra charge.
Related Help and Surrounding Areas
We fix leaking taps everywhere from Breakfast Point to Putney and Cabarita, alongside the rest of the Canada Bay area. If the issue is a full burst rather than a drip, our burst & leaking pipes team takes that job instead, and a failing hot water valve is covered under hot water repairs.
Let’s get it flowing again
Get Leaking Tap Repair Sorted, Call Now
Left alone, a small drip wastes water and can damage cabinetry underneath over time. Call (02) 9140 0159 and we'll get it sorted properly, no more topping up a bucket under the sink.
Good questions, straight answers
Straight-Answer Leaking Tap Repair FAQs
Here's what Mortlake homeowners usually want to know before booking a leaking tap repair.
Do I approve the price before any Leaking Tap Repair work begins?
Yes. We look at the tap, explain what's actually worn, and agree the price with you before any part gets touched, wherever you are across Mortlake and greater Canada Bay.
Does old pipework change how Leaking Tap Repair is done?
It can. Older brass tapware sometimes takes a part that's no longer a standard stock size, so we occasionally need to source a specific fitting rather than grab one straight off the van.
Should I attempt a fix before calling a plumber?
Turning the isolation valve under the sink off is safe if you can reach it and just want the dripping to stop for now. Taking the tap apart yourself risks stripping the washer seat, which turns a small job into a bigger one.
Is this an emergency or can it wait?
A dripping tap almost never needs an after-hours callout. It's worth booking at a normal time unless the water won't shut off at all, in which case call us any hour.
Which symptoms point to needing Leaking Tap Repair?
A steady trickle that won't stop no matter how firmly you close the tap, a handle gone stiff or loose, or a faint whistle while water's running usually point to a worn valve inside.
Do I need a licensed plumber for Leaking Tap Repair?
Yes, for anything beyond a basic aerator clean. Tap work connects to the water supply, which NSW rules reserve for a licensed plumber.